Telemecanique Thermal overload protection relay LR2-D23 JR28-D23

1.Used with CJX2(LC1) contactor 2.Rated voltage up to 690V 3.Rated current up to 150A 4.Telemecanique (Shineider) standard

1.Specification

LR2(JR28,VR28) series thermal overload relay are suitable for overload and phase-failure protection of ACmotors with frequency of 50/60Hz, voltage up to 690V, current up to 0.1-150A under 8-hours duty or uninterrupted duty.Functions provided by these relays, are phase-failure protection, ON/OFF indication,temperaturecompensation, and manual/automatic reset.Applicable Standards: National Standard: GB 14048. International Standard: IEC 60947-4-1The relays can be mounted onto contactors or installed as single units.2.Operation condition

(1)The altitude couldn t exceed 2000m.(2)Ambient temperature: -5 ~+55 and the average temperature no more than +35 in 24hours.(3)Atmosphere: Comparative humidity no more than 50% at max +40 , and it may be higher at a lower temperature. The lowest average temperature no more than +20 in the wettest month.The maximum average comparative humidity of this month couldn t exceed 90%, The change of temperature leading to dew on the product must be considered.(4)Class of pollution: Class 3.(5)The slope between installation surface and vertical surface couldn t exceed 5o.(6)Keeping away from explosive, corrosive and electric atomy.(7)Keeping dry.(8)The product should be used and installed at certain place without any shock, vibration etc.

3. Main Technical

 

Type	Number	Setting range (A)	For contactor
JR28-25	1301	0.1~0.16	CJX2-09~32
	1302	0.16~0.25	CJX2-09~32
	1303	0.25~0.4	CJX2-09~32
	1304	0.4~0.63	CJX2-09~32
	1305	0.63~1	CJX2-09~32
	1306	1~1.6	CJX2-09~32
	1307	1.6~2.5	CJX2-09~32
	1308	2.5~4	CJX2-09~32
	1310	4~6	CJX2-09~32
	1312	5.5~8	CJX2-09~32
	1314	7~10	CJX2-09~32
	1316	9~13	CJX2-09~32
	1321	12~18	CJX2-09~32
	1322	17~25	CJX2-32
JR28-36	2353	23~32	CJX2-09~32
	2355	30~40	CJX2-09~32
JR28-93	3322	17~25	CJX2-09~32
	3353	23~32	CJX2-09~32
	3355	30~40	CJX2-09~32
	3357	37~50	CJX2-09~32
	3359	48~65	CJX2-09~32
	3361	55~70	CJX2-09~32
	3363	63~80	CJX2-09~32
	3365	80~93	CJX2-95
JR28-150	4365	80~104	CJX2-95
	4367	95~120	CJX2-95~115
	4369	110~140	CJX2-115

Type	Number	Setting range (A)	For contactor
JR28-150	5369	90~150	CJX2-150
JR28-200	F5357	30~50	CJX2-F115~F185
	F5363	48~80	CJX2-F115~F185
	F5367	60~100	CJX2-F115~F185
	F5369	90~150	CJX2-F115~F185
JR28-630	F5371	132~220	CJX2-F225~F265
	F7375	200~330	CJX2-F225~F500
	F7379	300~500	CJX2-F225~F500
	F7381	380~630	CJX2-F400~F630

Motion Characteristic: Three-phase Balance Motion Time

No	Times of the setting current	Motion time			Start condition	Ambient temperature
1	1.05	>2h			Cold state	20±5oC
2	1.2	<2h			Heat state(Following the No.1 test)
3	1.5	<4min
4	7.2	10A	2s< Tp≤10s	≤63A	Cold state
		10	4s< Tp≤10s	>63A

Phase-losing Motion Characteristic

No	Times of the setting current		Motion time	Start condition	Ambienttemperature
	Any two phases	Another phase
1	1.0	0.9	>2h	Cold state	20±5oC
2	1.15	0	<2h	Heat state(Following the No.1 test)

4.Packing detail

Model	Carton size(CM)	CTN	WEIGHT
		PCS	(kg)
JR28-25	51.5*25.5*30.5	100	17
(LR2-D13)
JR28-36	44*39.7*24.3	75	20
(LR2-D23)
JR28-93	44*39.7*24.3	50	23
(LR2-D33)
JR28-150	44*39.7*24.3	50	23
(LR2-D43)
JR28N-25	46.5*27.5*33.5	100	15
(LRD-13)
JR28N-36	44*39.7*24.3	75	20
(LRD-23)
JR28N-93	44*39.7*24.3	50	23
(LRD-33)
JR28-200	47*29*40.5	30	24
(LR9-F53)
JR28-630	47*29*40.5	18	27
(LR9-F73)

5.Overall and Mounting Dimmensions

6.The time-current curves characteristic

7.Accessory

8.Product photo

 

Telemecanique Thermal overload protection relay LR2-D23 JR28-D23